SEALING AND INSULATION

GRAPHITE - Flexible Graphite Products Line Card and Cross Reference


Product Style Description Thickness
(1/1000")
Comparable Styles
Grafoil®   Calgraph®
Industrial Grade Foil IGF Industrial grade homogeneous flexible graphite foil, carbon content 99% min., no resin binders or any other chemical fillers, available in continuous rolls or in individual sheets 005
010
015 (1/64")
020
025
030 (1/32")
062 (1/16")
GTB B
Regular Laminate LR Laminated industrial grade flexible graphite sheet 125 (1/8") GHL B
Reinforced Laminate

LS
LM
LW
Flexible Graphite Laminate reinforced
with specified insert:

Stainless steel sheet insert
Mylar film insert
Stainless steel wire mesh insert
030 (1/32")
062 (1/16")
125 (1/8")


GHR
GHP
GHS


BSSC
BMY
BSC
Tanged Laminate


LTT
LTS
Flexible Graphite mechanically
bonded on both sides of a perforated
metal tang core

Inserted w/ tinplated steel tang
Inserted w/ stainless steel tang
030 (1/32")
047
062 (1/16")
125 (1/8")




GHE




BTCSS
Packing Tape
(Industrial Grade)
IGT20
IGT21
IGT22
IGT23
Plain
Crinkled
Plain and PSA backed
Crinkled and PSA backed
010
015 (1/64")
GTZ
GTZ
GTH
GTH
B Tape
Compression Packing GCP101

GCP201
GCP301
GCP2000
High purity expanded natural graphite filaments braided and subsequently calendered forming square shaped compression packing
Similar construction as GCP101 with Inconel Wire Inserts
Similar construction as GCP 101 with Carbon Fiber Corners
PTFE Graphited Packing

Grafoil® is a registered trade mark of Union Carbide Corporation.  Calgraph® is a registered trade mark of Polycarbon, Inc.



FLEXIBLE GRAPHITE - Industrial Grade Foil, Style IGF

Product Style Name: IGF
 
Descriptions: Pure homogeneous flexible graphite foil, no resin binders or any other chemical fillers
 
Typical Properties: Chemical Compositions
  Carbon Content: 99% Min.
  Total Sulfur: 1000 ppm Max.
  Leachable Chloride: 20 ppm Max.
 
  Physical Properties
  Density: 62.4 lb./cu.ft. (Standard)
    70 lb./cu.ft. (High density)
  Compressibility: 45% (ASTM F 36)
  Recovery: 15% (ASTM F 36)
  Creep Relaxation: 5%
  Tensile Strength: 650 psi
 
  Application Conditions
  Applicable Media: Water, sea water, steam, acids, alkalies, gases, oils, solvents, etc., except strong oxidizers
  Service Temperature: Minimum:    -328°F (-200°C)
    Maximum in air:    932°F (480°C)
    Maximum in steam:    1200°F (652°C)
    Maximum in reducing or inert material:    5400°F (3000°C)
  pH Value Range: 0-14
 
  Available Size
  Thickness: from 0.005” to 1/16”
  Width: up to 60”
  Length: 108’ or custom length

The above data is typical and no warranty is implied thereof. Rev. 05/05/03



FLEXIBLE GRAPHITE - Sizes

Style Thickness Size
IGF:
Industrial Grade Graphite Foil
1/64” special order only 39.4” X 39.4”
1/32” special order only
60” X 60” available
39.4” X 39.4”
60” X 60”
1/16” 39.4” X 39.4”
60” X 60”
 
LR:
Regular Laminated Graphite Foil
 
1/8” 39.4” X 39.4”
 
LS:
SS316, 0.002”
Laminated Graphite with
Stainless Steel 316 Insert
1/32” 39.4” X 39.4”
60” X 60”
1/16” 39.4” X 39.4”
60” X 60”
.020” 39.4” X 39.4”
1/8” 39.4” X 39.4”
60” X 60”
3/32” 39.4” X 39.4”
1/4” 39.4” X 39.4”
 
LTS:
SS316, 0.004”
Laminated Graphite with
Stainless Steel 316 Tang Insert
1/32” 39.4” X 39.4”
1/16” 39.4” X 39.4”
60” X 60”
1/8” 39.4” X 39.4”
60” X 60”
 
LTT:
Laminated Graphite with
Tinplated steel, 0.008”
Tang Insert
1/32” 39.4” X 39.4”
1/16” 39.4v X 39.4”
60” X 60”
1/8” 39.4” X 39.4”
60” X 60”
 
LW:
Laminated Graphite with
Wire Mesh (24)
Insert
1/32” 39.4” X 39.4”
1/16” 39.4” X 39.4”
1/8” 39.4” X 39.4”
 
LM:
Laminated Graphite with
Mylar .00048”
Insert
1/16” 39.4” X 39.4”
60” X 60”
1/8” 39.4” X 39.4”
60” X 60”

 



FLEXIBLE GRAPHITE - Foil in Rolls

Description Item Number
Flexible Graphite, IGF .005” X 24” X 500’ Flexible:IGF:IGF00524500
 
Flexible Graphite, IGF .005” X 39.4” X 108’ Flexible:IGF:IGF00540108
 
Flexible Graphite, IGF .010” X 39.4” X 109’ Flexible:IGF:IGF01040108
 
Flexible Graphite, IGF .010” X 24” X 108’ Flexible:IGF:IGF01024108
 
Flexible Graphite, IGF .010” X 24” X 500’ Flexible:IGF:IGF01024500
 
Flexible Graphite, IGF .010” X 39.4” X 14" Flexible:IGF:IGF0104014
 
Flexible Graphite, IGF 1/64” X 39.4” X 108’ Flexible:IGF:IGF01540108
 
Flexible Graphite, IGF 1/64” X 24” X 108’ Flexible:IGF:IGF01524108
 
Flexible Graphite, IGF 1/64” X 5” X 216’ Flexible:IGF:IGF01505216
 
Flexible Graphite, IGF .020” X 5” X 108’ Flexible:IGF:IGF02005108
 
Flexible Graphite, IGF .020” X 24” X 108’ Flexible:IGF:IGF02024108
 
Flexible Graphite, IGF .020” X 39.4” X 108’ Flexible:IGF:IGF02040108
 
Flexible Graphite, IGF .025” X 4” X 108’ Flexible:IGF:IGF02504108
 
Flexible Graphite, IGF .025” X 39.4” X 108' Flexible:IGF:IGF02540108
 
Flexible Graphite, IGF .030” X 39.4” X 108’ Flexible:IGF:IGF03040108
 
Flexible Graphite, IGF .030” X 24” X 108’ Flexible:IGF:IGF03024108
 
Flexible Graphite, IGF .030” X 5” X 216’ Flexible:IGF:IGF03005216
 
Flexible Graphite, IGF .040” X 39.4” X 108’ Flexible:IGF:IGF04040108
 
Flexible Graphite, IGF 1/16” X 39.4” X 108’ Flexible:IGF:IGF06240108
 
Flexible Graphite, IGF 1/16” X 24” X 108’ Flexible:IGF:IGF06224108
 

We can order graphite rolls in custom widths and lengths to fit your business needs.



REINFORCED GRAPHITE LAMINATES - 316 stainless steel foil

Product Style Name: LS316
 
Description: Flexible Graphite inserted with style 316 stainless steel foil.
 
Typical Properties: Chemical Composition of Flexible Graphite
  Carbon Content: 99% Min.
  Leachable Chloride: 20 ppm Max.
  Total Sulfur: 1000 ppm Max.
 
  Type of Insert: Style 316 stainless steel foil, 0.002” thick
 
  M Factor: 2
  Y Stress: 1000 psi
  Compressibility: 40% (Tested under 5000 psi)
  Recovery: 18% (Tested under 5000 psi)
 
  Standard Size: Thickness: 1/32”, 1/16”, 1/8” or other custom thickness
    Width: 39.4”, 60”
    Length: 39.4”, 60”
 
  Applicable Media: Water, sea water, steam, acids, alkalies, gases, oils, solvents, etc., except strong oxidizers
  Service Temperature: Minimum:    -328°F (-200°C)
    Maximum in air:    932°F (480°C)
    Maximum in steam:    1200°F (652°C)
    Maximum in reducing or inert material:    5400°F (3000°C)
 
  LS316 Reinforced Graphite Laminate is comparable to GH™R, or BSSC™.

GH™R is a trademark of UCAR. BSSC™ is a trademark of Polycarbon. The above data is typical and no warranty is implied thereof. Rev. 05/05/03.



REINFORCED GRAPHITE LAMINATES - Mylar® film

Product Style Name: LM
 
Description: Flexible Graphite inserted with Mylar® film.
 
Typical Properties: Chemical Composition of Flexible Graphite
  Carbon Content: 99% Min.
  Leachable Chloride: 20 ppm Max.
  Total Sulfur: 1000 ppm Max.
 
  Type of Insert: Du Pont Mylar® film, .00048” thick
 
  M Factor: 1.5
  Y Stress: 900 psi
  Compressibility: 44% (Tested under 5000 psi)
  Recovery: 16% (Tested under 5000 psi)
 
  Applicable Media: Water, sea water, steam, acids, alkalies, gases, oils, solvents, etc., except strong oxidizers
  Service Temperature: Minimum:    -328°F (-200°C)
    Maximum in air:    932°F (480°C)
    Maximum in steam:    1200°F (652°C)
    Maximum in reducing or inert material:    5400°F (3000°C)
 
  Available Size: Thickness: 1/32”, 1/16”, 1/8” or other custom thickness
    Width: 39.4”, 60”
    Length: 39.4”, 60”

The above data is typical and no warranty is implied thereof. Rev. 05/05/03.



REINFORCED GRAPHITE LAMINATES - Steel Wire Mesh

Product Style Name: LW
 
Description: Flexible Graphite inserted with stainless steel wire mesh (screen).
 
Typical Properties: Chemical Composition of Flexible Graphite
  Carbon Content: 99% Min.
  Leachable Chloride: 20 ppm Max.
  Total Sulfur: 1000 ppm Max.
 
  Type of Insert: 316 stainless steel wire mesh, 24 mesh, 0.0075” Wire Dia.
 
  M Factor: 2
  Y Stress: 1500 psi
  Compressibility: 38% (Tested under 5000 psi)
  Recovery: 20% (Tested under 5000 psi)
 
  Applicable Media: Water, sea water, steam, acids, alkalies, gases, oils, solvents, etc., except strong oxidizers
  Service Temperature: Minimum:    -328°F (-200°C)
    Maximum in air:    932°F (480°C)
    Maximum in steam:    1200°F (652°C)
    Maximum in reducing or inert material:    5400°F (3000°C)
 
  Available Size: Thickness: 1/32”, 1/16”, 1/8” or other custom thickness
    Width: 39.4”, 60”
    Length: 39.4”, 60”

The above data is typical and no warranty is implied thereof. Rev. 05/05/03.



REINFORCED GRAPHITE LAMINATES - Tanged Tinplated Steel Core

Product Style Name: LTT
 
Description: Flexible Graphite mechanically bonded on both sides of a tanged metal core.
 
Typical Properties: Chemical Composition of Flexible Graphite
  Carbon Content: 99% Min.
  Leachable Chloride: 20 ppm Max.
  Total Sulfur: 1000 ppm Max.
 
  Type of Tang: Tinplated Steel, thickness of steel: .008”
 
  M Factor: 2
  Y Stress: 2800 psi
  Compressibility: 20%-25% (Tested under 5000 psi)
  Recovery: 25%-30% (Tested under 5000 psi)
 
  Applicable Media: Water, steam, gasoline, or other mild corrosive media
  Service Temperature: Minimum:    -328°F (-200°C)
    Maximum in air:    932°F (480°C)
    Maximum in steam:    1200°F (652°C)
    Maximum in reducing or inert material:    5400°F (3000°C)
 
  Available Size: Thickness: 1/32”, .047”, 1/16”, 1/8” or other custom thickness
    Width: 20”, 24”, 39.4”
    Length: 39.4”

The above data is typical and no warranty is implied thereof. Rev. 05/05/03.



REINFORCED GRAPHITE LAMINATES - Tanged Stainless Steel Core

Product Style Name: LTS
 
Description: Flexible Graphite mechanically bonded on both sides of a tanged metal core.
 
Typical Properties: Chemical Composition of Flexible Graphite
  Carbon Content: 99% Min.
  Leachable Chloride: 20 ppm Max.
  Total Sulfur: 1000 ppm Max.
 
  Type of Tang: Stainless steel, thickness of stainless steel: 0.004”
 
  M Factor: 2
  Y Stress: 2800 psi
  Compressibility: 30% (Tested under 5000 psi)
  Recovery: 30% (Tested under 5000 psi)
 
  Applicable Media: Water, sea water, steam, gasoline, or other mild corrosive media
  Service Temperature: Minimum:    -328°F (-200°C)
    Maximum in air:    932°F (480°C)
    Maximum in steam:    1200°F (652°C)
    Maximum in reducing or inert material:    5400°F (3000°C)
 
  Available Size: Thickness: 1/32”, 1/16”, 1/8” or other custom thickness
    Width: 39.4”, 60”
    Length: 39.4”, 60”

The above data is typical and no warranty is implied thereof. Rev. 05/05/03.



GRAPHITE - Mechanical Compression Packing

Base Material Style Description Comparable
Styles
Graphite GCP101


GCP201
GCP301
GCP401
GCP501
GCP601
High purity expanded natural graphite filaments braided and subsequently calendared forming square shaped compression packing
 
Graphite Compression Packing, with inconel wire inserts
Graphite Compression Packing, with carbon fiber corners
Graphite Compression Packing, with external-braided inconel wire mesh
Graphite Compression Packing, with high-modulus carbon fiber insert
Graphite Compression Packing, with tube/round section
 
PTFE FCP102
FCP202
FCP302
FCP402
FCP502
FCP602
Pure PTFE braided packing
PTFE filament braided packing
PTFE filament braided packing
PTFE with Silicon rubber core braided packing
PTFE with lubricant dipped braided packing
PTFE with aramid fiber in corners reinforced braided packing
 
PTFE Graphite GFCP2000
GFCP2010
GFCP2020
GFCP2030
GFCP2040
GFCP2050
PTFE graphite braided packing
PTFE graphite braided packing with silicon rubber core
PTFE graphite braided packing reinforced with aramid corners
PTFE graphite braided packing with built in carbon fiber reinforcement
PTFE graphite filament braided packing
PTFE graphite braided packing (W. L. Gore fiber)
GORE-TEX®
GFO
Carbon Fiber CCP4000
CCP4002
Carbon fiber impregnated with graphite braided packing
Carbon fiber impregnated with PTFE braided packing
 
PTFE-
Impregnated
CPF3002
CPF3012
CPF3022
CPF3032
CPF3042
CPF3052
CPF3062
CPF3072
CPF3082
Ramie impregnated with PTFE braided packing
Acrylic fiber impregnated with PTFE braided packing
Acylic fiber with graphite impregnated braided packing
Carbon fiber impregnated with PTFE braided packing
Meta type aramid fiber impregnated with PTFE braided packing (white)
Spun aramid fiber impregnated with PTFE braided packing
Carbonized fiber impregnated with PTFE braided packing
Aramid fiber impregnated with PTFE braided packing
PTFE-impregnated synthesis fiber braided packing
 

GCP101, 201, 301 and GFCP2000 are always available in our Tucson warehouse. The others must be pre-ordered with 6 week lead time. We would be happy to stock them for customers that want them regularly.

© Copyright 2011 • NonMetals. Inc.